Add softReset as an option for .begin

keywords.txt

@@ -121,6 +121,7 @@ setNMEAOutputPort	KEYWORD2
 
 factoryReset	KEYWORD2
 hardReset	KEYWORD2
+softwareResetGNSSOnly	KEYWORD2
 factoryDefault	KEYWORD2
 
 saveConfiguration	KEYWORD2

src/SparkFun_u-blox_GNSS_Arduino_Library.cpp

@@ -438,7 +438,7 @@ void SFE_UBLOX_GNSS::setPacketCfgPayloadSize(size_t payloadSize)
 }
 
 //Initialize the I2C port
-bool SFE_UBLOX_GNSS::begin(TwoWire &wirePort, uint8_t deviceAddress, uint16_t maxWait)
+bool SFE_UBLOX_GNSS::begin(TwoWire &wirePort, uint8_t deviceAddress, uint16_t maxWait, bool softReset)
 {
   commType = COMM_TYPE_I2C;
   _i2cPort = &wirePort; //Grab which port the user wants us to use
@@ -460,20 +460,40 @@ bool SFE_UBLOX_GNSS::begin(TwoWire &wirePort, uint8_t deviceAddress, uint16_t ma
   //New in v2.0: allocate memory for the file buffer - if required. (The user should have called setFileBufferSize already)
   createFileBuffer();
 
+  //Issue a soft reset to clear the buffers
+  if (softReset)
+    softwareResetGNSSOnly();
+
   // Call isConnected up to three times - tests on the NEO-M8U show the CFG RATE poll occasionally being ignored
   bool connected = isConnected(maxWait);
 
   if (!connected)
+  {
+#ifndef SFE_UBLOX_REDUCED_PROG_MEM
+    if ((_printDebug == true) || (_printLimitedDebug == true)) // This is important. Print this if doing limited debugging
+    {
+      _debugSerial->println(F("begin: isConnected - second attempt"));
+    }
+#endif
     connected = isConnected(maxWait);
+  }
 
   if (!connected)
+  {
+#ifndef SFE_UBLOX_REDUCED_PROG_MEM
+    if ((_printDebug == true) || (_printLimitedDebug == true)) // This is important. Print this if doing limited debugging
+    {
+      _debugSerial->println(F("begin: isConnected - third attempt"));
+    }
+#endif
     connected = isConnected(maxWait);
+  }
 
   return (connected);
 }
 
 //Initialize the Serial port
-bool SFE_UBLOX_GNSS::begin(Stream &serialPort, uint16_t maxWait)
+bool SFE_UBLOX_GNSS::begin(Stream &serialPort, uint16_t maxWait, bool softReset)
 {
   commType = COMM_TYPE_SERIAL;
   _serialPort = &serialPort; //Grab which port the user wants us to use
@@ -485,20 +505,40 @@ bool SFE_UBLOX_GNSS::begin(Stream &serialPort, uint16_t maxWait)
   //New in v2.0: allocate memory for the file buffer - if required. (The user should have called setFileBufferSize already)
   createFileBuffer();
 
+  //Issue a soft reset to clear the buffers
+  if (softReset)
+    softwareResetGNSSOnly();
+
   // Call isConnected up to three times - tests on the NEO-M8U show the CFG RATE poll occasionally being ignored
   bool connected = isConnected(maxWait);
 
   if (!connected)
+  {
+#ifndef SFE_UBLOX_REDUCED_PROG_MEM
+    if ((_printDebug == true) || (_printLimitedDebug == true)) // This is important. Print this if doing limited debugging
+    {
+      _debugSerial->println(F("begin: isConnected - second attempt"));
+    }
+#endif
     connected = isConnected(maxWait);
+  }
 
   if (!connected)
+  {
+#ifndef SFE_UBLOX_REDUCED_PROG_MEM
+    if ((_printDebug == true) || (_printLimitedDebug == true)) // This is important. Print this if doing limited debugging
+    {
+      _debugSerial->println(F("begin: isConnected - third attempt"));
+    }
+#endif
     connected = isConnected(maxWait);
+  }
 
   return (connected);
 }
 
 // Initialize for SPI
-bool SFE_UBLOX_GNSS::begin(SPIClass &spiPort, uint8_t csPin, uint32_t spiSpeed, uint16_t maxWait)
+bool SFE_UBLOX_GNSS::begin(SPIClass &spiPort, uint8_t csPin, uint32_t spiSpeed, uint16_t maxWait, bool softReset)
 {
   commType = COMM_TYPE_SPI;
   _spiPort = &spiPort;
@@ -538,14 +578,34 @@ bool SFE_UBLOX_GNSS::begin(SPIClass &spiPort, uint8_t csPin, uint32_t spiSpeed,
     }
   }
 
-  // Call isConnected up to three times
+  //Issue a soft reset to clear the buffers
+  if (softReset)
+    softwareResetGNSSOnly();
+
+  // Call isConnected up to three times - tests on the NEO-M8U show the CFG RATE poll occasionally being ignored
   bool connected = isConnected(maxWait);
 
   if (!connected)
+  {
+#ifndef SFE_UBLOX_REDUCED_PROG_MEM
+    if ((_printDebug == true) || (_printLimitedDebug == true)) // This is important. Print this if doing limited debugging
+    {
+      _debugSerial->println(F("begin: isConnected - second attempt"));
+    }
+#endif
     connected = isConnected(maxWait);
+  }
 
   if (!connected)
+  {
+#ifndef SFE_UBLOX_REDUCED_PROG_MEM
+    if ((_printDebug == true) || (_printLimitedDebug == true)) // This is important. Print this if doing limited debugging
+    {
+      _debugSerial->println(F("begin: isConnected - third attempt"));
+    }
+#endif
     connected = isConnected(maxWait);
+  }
 
   return (connected);
 }
@@ -5413,6 +5473,20 @@ void SFE_UBLOX_GNSS::hardReset()
   sendCommand(&packetCfg, 0); // don't expect ACK
 }
 
+void SFE_UBLOX_GNSS::softwareResetGNSSOnly()
+{
+  // Issue controlled software reset (GNSS only)
+  packetCfg.cls = UBX_CLASS_CFG;
+  packetCfg.id = UBX_CFG_RST;
+  packetCfg.len = 4;
+  packetCfg.startingSpot = 0;
+  payloadCfg[0] = 0;          // hot start
+  payloadCfg[1] = 0;          // hot start
+  payloadCfg[2] = 0x02;       // 0x02 = Controlled software reset (GNSS only)
+  payloadCfg[3] = 0;          // reserved
+  sendCommand(&packetCfg, 0); // don't expect ACK
+}
+
 //Reset module to factory defaults
 //This still works but it is the old way of configuring ublox modules. See getVal and setVal for the new methods
 bool SFE_UBLOX_GNSS::factoryDefault(uint16_t maxWait)

src/SparkFun_u-blox_GNSS_Arduino_Library.h

@@ -599,11 +599,11 @@ public:
 	void setPacketCfgPayloadSize(size_t payloadSize); // Set packetCfgPayloadSize
 
 	//By default use the default I2C address, and use Wire port
-	bool begin(TwoWire &wirePort = Wire, uint8_t deviceAddress = 0x42, uint16_t maxWait = defaultMaxWait); //Returns true if module is detected
+	bool begin(TwoWire &wirePort = Wire, uint8_t deviceAddress = 0x42, uint16_t maxWait = defaultMaxWait, bool softReset = false); //Returns true if module is detected
 	//serialPort needs to be perviously initialized to correct baud rate
-	bool begin(Stream &serialPort, uint16_t maxWait = defaultMaxWait); //Returns true if module is detected
+	bool begin(Stream &serialPort, uint16_t maxWait = defaultMaxWait, bool softReset = false); //Returns true if module is detected
 	//SPI - supply instance of SPIClass, chip select pin and SPI speed (in Hz)
-	bool begin(SPIClass &spiPort, uint8_t csPin, uint32_t spiSpeed, uint16_t maxWait = defaultMaxWait);
+	bool begin(SPIClass &spiPort, uint8_t csPin, uint32_t spiSpeed, uint16_t maxWait = defaultMaxWait, bool softReset = false);
 
 	void end(void); //Stop all automatic message processing. Free all used RAM
 
@@ -780,7 +780,8 @@ public:
 
 	void factoryReset(); //Send factory reset sequence (i.e. load "default" configuration and perform hardReset)
 	void hardReset();	 //Perform a reset leading to a cold start (zero info start-up)
-	bool factoryDefault(uint16_t maxWait = defaultMaxWait);							 //Reset module to factory defaults
+	void softwareResetGNSSOnly(); //Controlled Software Reset (GNSS only) only restarts the GNSS tasks, without reinitializing the full system or reloading any stored configuration.
+	bool factoryDefault(uint16_t maxWait = defaultMaxWait); //Reset module to factory defaults
 
 	//Save configuration to BBR / Flash