More u-blox corrections

examples/Callbacks/CallbackExample1_NAV_PVT/CallbackExample1_NAV_PVT.ino

@@ -80,9 +80,9 @@ void setup()
 
   //myGNSS.enableDebugging(); // Uncomment this line to enable helpful debug messages on Serial
 
-  if (myGNSS.begin() == false) //Connect to the Ublox module using Wire port
+  if (myGNSS.begin() == false) //Connect to the u-blox module using Wire port
   {
-    Serial.println(F("Ublox GPS not detected at default I2C address. Please check wiring. Freezing."));
+    Serial.println(F("u-blox GNSS not detected at default I2C address. Please check wiring. Freezing."));
     while (1);
   }
 

examples/Callbacks/CallbackExample2_NAV_ODO/CallbackExample2_NAV_ODO.ino

@@ -63,9 +63,9 @@ void setup()
 
   //myGNSS.enableDebugging(); // Uncomment this line to enable helpful debug messages on Serial
 
-  if (myGNSS.begin() == false) //Connect to the Ublox module using Wire port
+  if (myGNSS.begin() == false) //Connect to the u-blox module using Wire port
   {
-    Serial.println(F("Ublox GPS not detected at default I2C address. Please check wiring. Freezing."));
+    Serial.println(F("u-blox GNSS not detected at default I2C address. Please check wiring. Freezing."));
     while (1);
   }
 

examples/Callbacks/CallbackExample3_TIM_TM2/CallbackExample3_TIM_TM2.ino

@@ -86,9 +86,9 @@ void setup()
 
   //myGNSS.enableDebugging(); // Uncomment this line to enable helpful debug messages on Serial
 
-  if (myGNSS.begin() == false) //Connect to the Ublox module using Wire port
+  if (myGNSS.begin() == false) //Connect to the u-blox module using Wire port
   {
-    Serial.println(F("Ublox GPS not detected at default I2C address. Please check wiring. Freezing."));
+    Serial.println(F("u-blox GNSS not detected at default I2C address. Please check wiring. Freezing."));
     while (1);
   }
 

examples/Callbacks/CallbackExample4_HNR/CallbackExample4_HNR.ino

@@ -83,9 +83,9 @@ void setup()
 
   //myGNSS.enableDebugging(); // Uncomment this line to enable debug messages on Serial
 
-  if (myGNSS.begin() == false) //Connect to the Ublox module using Wire port
+  if (myGNSS.begin() == false) //Connect to the u-blox module using Wire port
   {
-    Serial.println(F("Ublox GPS not detected at default I2C address. Please check wiring. Freezing."));
+    Serial.println(F("u-blox GNSS not detected at default I2C address. Please check wiring. Freezing."));
     while (1);
   }
 

examples/Callbacks/CallbackExample5_ESF/CallbackExample5_ESF.ino

@@ -142,9 +142,9 @@ void setup()
 
   //myGNSS.enableDebugging(); // Uncomment this line to enable debug messages on Serial
 
-  if (myGNSS.begin() == false) //Connect to the Ublox module using Wire port
+  if (myGNSS.begin() == false) //Connect to the u-blox module using Wire port
   {
-    Serial.println(F("Ublox GPS not detected at default I2C address. Please check wiring. Freezing."));
+    Serial.println(F("u-blox GNSS not detected at default I2C address. Please check wiring. Freezing."));
     while (1);
   }
 

examples/Data_Logging/DataLoggingExample1_NAV_PVT/DataLoggingExample1_NAV_PVT.ino

@@ -158,7 +158,7 @@ void setup()
   // I.e. room for three messages plus an empty tail byte.
   myGNSS.setFileBufferSize(301); // setFileBufferSize must be called _before_ .begin
 
-  if (myGNSS.begin() == false) //Connect to the Ublox module using Wire port
+  if (myGNSS.begin() == false) //Connect to the u-blox module using Wire port
   {
     Serial.println(F("u-blox GNSS not detected at default I2C address. Please check wiring. Freezing..."));
     while (1);

examples/Data_Logging/DataLoggingExample2_TIM_TM2/DataLoggingExample2_TIM_TM2.ino

@@ -164,7 +164,7 @@ void setup()
   // I.e. room for three messages plus an empty tail byte.
   myGNSS.setFileBufferSize(109); // setFileBufferSize must be called _before_ .begin
 
-  if (myGNSS.begin() == false) //Connect to the Ublox module using Wire port
+  if (myGNSS.begin() == false) //Connect to the u-blox module using Wire port
   {
     Serial.println(F("u-blox GNSS not detected at default I2C address. Please check wiring. Freezing..."));
     while (1);

examples/Data_Logging/DataLoggingExample3_RXM_SFRBX_and_RAWX/DataLoggingExample3_RXM_SFRBX_and_RAWX.ino

@@ -160,7 +160,7 @@ void setup()
   // getMaxFileBufferAvail will tell us the maximum number of bytes which the file buffer has contained.
   myGNSS.setFileBufferSize(fileBufferSize); // setFileBufferSize must be called _before_ .begin
 
-  if (myGNSS.begin() == false) //Connect to the Ublox module using Wire port
+  if (myGNSS.begin() == false) //Connect to the u-blox module using Wire port
   {
     Serial.println(F("u-blox GNSS not detected at default I2C address. Please check wiring. Freezing..."));
     while (1);

examples/Data_Logging/DataLoggingExample4_RXM_without_Callbacks/DataLoggingExample4_RXM_without_Callbacks.ino

@@ -131,7 +131,7 @@ void setup()
   // getMaxFileBufferAvail will tell us the maximum number of bytes which the file buffer has contained.
   myGNSS.setFileBufferSize(fileBufferSize); // setFileBufferSize must be called _before_ .begin
 
-  if (myGNSS.begin() == false) //Connect to the Ublox module using Wire port
+  if (myGNSS.begin() == false) //Connect to the u-blox module using Wire port
   {
     Serial.println(F("u-blox GNSS not detected at default I2C address. Please check wiring. Freezing..."));
     while (1);

examples/Data_Logging/DataLoggingExample5_Fast_RXM/DataLoggingExample5_Fast_RXM.ino

@@ -131,7 +131,7 @@ void setup()
   // getMaxFileBufferAvail will tell us the maximum number of bytes which the file buffer has contained.
   myGNSS.setFileBufferSize(fileBufferSize); // setFileBufferSize must be called _before_ .begin
 
-  if (myGNSS.begin() == false) //Connect to the Ublox module using Wire port
+  if (myGNSS.begin() == false) //Connect to the u-blox module using Wire port
   {
     Serial.println(F("u-blox GNSS not detected at default I2C address. Please check wiring. Freezing..."));
     while (1);

examples/Example14_DebugOutput/Example14_DebugOutput.ino

@@ -40,7 +40,7 @@ void setup()
 
   Wire.begin();
 
-  if (myGNSS.begin() == false) //Connect to the Ublox module using Wire port
+  if (myGNSS.begin() == false) //Connect to the u-blox module using Wire port
   {
     Serial.println(F("u-blox GNSS not detected at default I2C address. Please check wiring. Freezing."));
     while (1);