PlatformIO-Libs/SparkFunGNSS
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update data logging examples 4-6

Browse Source
This commit is contained in:
PaulZC
2022-02-06 16:57:21 +00:00
parent 5a4ac25f55
commit fae14c1a06
3 changed files with 18 additions and 27 deletions
Download Patch File Download Diff File Expand all files Collapse all files
examples/Data_Logging/DataLoggingExample4_RXM_without_Callbacks/DataLoggingExample4_RXM_without_Callbacks.ino
+6 -9
View File
@@ -35,9 +35,7 @@
Insert a formatted micro-SD card into the socket on the Carrier Board.
Connect the Carrier Board to your computer using a USB-C cable.
Ensure you have the SparkFun Apollo3 boards installed: http://boardsmanager/All#SparkFun_Apollo3
This code has been tested using version 2.1.0 of the Apollo3 boards on Arduino IDE 1.8.13.
- Version 2.1.1 of Apollo3 contains a feature which makes I2C communication with u-blox modules problematic
- We recommend using v2.1.0 of Apollo3 until v2.2.0 is released
This code has been tested using version 2.2.0 of the Apollo3 boards on Arduino IDE 1.8.13.
Select "Artemis MicroMod Processor" as the board type.
Press upload to upload the code onto the Artemis.
Open the Serial Monitor at 115200 baud to see the output.
@@ -77,6 +75,7 @@ File myFile; //File that all GNSS data is written to
#define sdWriteSize 512 // Write data to the SD card in blocks of 512 bytes
#define fileBufferSize 16384 // Allocate 16KBytes of RAM for UBX message storage
uint8_t *myBuffer; // A buffer to hold the data while we write it to SD card
unsigned long lastPrint; // Record when the last Serial print took place
unsigned long bytesWritten = 0; // Record how many bytes have been written to SD card
@@ -181,6 +180,8 @@ void setup()
myGNSS.logRXMRAWX(); // Enable RXM RAWX data logging
myBuffer = new uint8_t[sdWriteSize]; // Create our own buffer to hold the data while we write it to SD card
Serial.println(F("Press any key to stop logging."));
lastPrint = millis(); // Initialize lastPrint
@@ -198,9 +199,7 @@ void loop()
{
digitalWrite(LED_BUILTIN, HIGH); // Flash LED_BUILTIN each time we write to the SD card
uint8_t myBuffer[sdWriteSize]; // Create our own buffer to hold the data while we write it to SD card
myGNSS.extractFileBufferData((uint8_t *)&myBuffer, sdWriteSize); // Extract exactly sdWriteSize bytes from the UBX file buffer and put them into myBuffer
myGNSS.extractFileBufferData(myBuffer, sdWriteSize); // Extract exactly sdWriteSize bytes from the UBX file buffer and put them into myBuffer
myFile.write(myBuffer, sdWriteSize); // Write exactly sdWriteSize bytes from myBuffer to the ubxDataFile on the SD card
@@ -242,15 +241,13 @@ void loop()
{
digitalWrite(LED_BUILTIN, HIGH); // Flash LED_BUILTIN while we write to the SD card
uint8_t myBuffer[sdWriteSize]; // Create our own buffer to hold the data while we write it to SD card
uint16_t bytesToWrite = remainingBytes; // Write the remaining bytes to SD card sdWriteSize bytes at a time
if (bytesToWrite > sdWriteSize)
{
bytesToWrite = sdWriteSize;
}
myGNSS.extractFileBufferData((uint8_t *)&myBuffer, bytesToWrite); // Extract bytesToWrite bytes from the UBX file buffer and put them into myBuffer
myGNSS.extractFileBufferData(myBuffer, bytesToWrite); // Extract bytesToWrite bytes from the UBX file buffer and put them into myBuffer
myFile.write(myBuffer, bytesToWrite); // Write bytesToWrite bytes from myBuffer to the ubxDataFile on the SD card