Merge pull request #139 from sparkfun/release_candidate

v2.2.10

examples/Callbacks/CallbackExample9_UseCallbackDataInLoop/CallbackExample9_UseCallbackDataInLoop.ino

@@ -0,0 +1,120 @@
+/*
+  Configuring the GNSS to automatically send position reports over I2C and display them using a callback
+  By: Paul Clark
+  SparkFun Electronics
+  Date: April 15th, 2022
+  License: MIT. See license file for more information but you can
+  basically do whatever you want with this code.
+
+  This example shows how to access the callback data from the main loop.
+  The simple way to check if new data is available is to use a global flag: set it in the callback, check it and clear it in the main loop.
+  Or, you can be more sophisticated and use the callback flags themselves.
+  This example shows how to use the sophisticated method.
+
+  Feel like supporting open source hardware?
+  Buy a board from SparkFun!
+  ZED-F9P RTK2: https://www.sparkfun.com/products/15136
+  NEO-M8P RTK: https://www.sparkfun.com/products/15005
+  SAM-M8Q: https://www.sparkfun.com/products/15106
+
+  Hardware Connections:
+  Plug a Qwiic cable into the GPS and a BlackBoard
+  If you don't have a platform with a Qwiic connection use the SparkFun Qwiic Breadboard Jumper (https://www.sparkfun.com/products/14425)
+  Open the serial monitor at 115200 baud to see the output
+*/
+
+#include <Wire.h> //Needed for I2C to GPS
+
+#include <SparkFun_u-blox_GNSS_Arduino_Library.h> //http://librarymanager/All#SparkFun_u-blox_GNSS
+SFE_UBLOX_GNSS myGNSS;
+
+// Callback: callbackPVT will be called when new NAV PVT data arrives
+// See u-blox_structs.h for the full definition of UBX_NAV_PVT_data_t
+//         _____  You can use any name you like for the callback. Use the same name when you call setAutoPVTcallbackPtr
+//        /                  _____  This _must_ be UBX_NAV_PVT_data_t
+//        |                 /               _____ You can use any name you like for the struct
+//        |                 |              /
+//        |                 |              |
+void callbackPVT(UBX_NAV_PVT_data_t *ubxDataStruct)
+{
+  Serial.println(F("Hey! The NAV PVT callback has been called!"));
+}
+
+void setup()
+{
+  Serial.begin(115200);
+  while (!Serial); //Wait for user to open terminal
+  Serial.println("SparkFun u-blox Example");
+
+  Wire.begin();
+
+  //myGNSS.enableDebugging(); // Uncomment this line to enable helpful debug messages on Serial
+
+  if (myGNSS.begin() == false) //Connect to the u-blox module using Wire port
+  {
+    Serial.println(F("u-blox GNSS not detected at default I2C address. Please check wiring. Freezing."));
+    while (1);
+  }
+
+  myGNSS.setI2COutput(COM_TYPE_UBX); //Set the I2C port to output UBX only (turn off NMEA noise)
+  myGNSS.saveConfigSelective(VAL_CFG_SUBSEC_IOPORT); //Save (only) the communications port settings to flash and BBR
+
+  myGNSS.setNavigationFrequency(2); //Produce two solutions per second
+
+  myGNSS.setAutoPVTcallbackPtr(&callbackPVT); // Enable automatic NAV PVT messages with callback to callbackPVT
+}
+
+void loop()
+{
+  
+  myGNSS.checkUblox(); // Check for the arrival of new data and process it.
+
+  // Check if new NAV PVT data has been received:
+  // If myGNSS.packetUBXNAVPVT->automaticFlags.flags.bits.callbackCopyValid is true, it indicates new PVT data has been received and has been copied.
+  // automaticFlags.flags.bits.callbackCopyValid will be cleared automatically when the callback is called.
+  
+  if (myGNSS.packetUBXNAVPVT->automaticFlags.flags.bits.callbackCopyValid == true)
+  {
+    // But, we can manually clear the callback flag too. This will prevent the callback from being called!
+    myGNSS.packetUBXNAVPVT->automaticFlags.flags.bits.callbackCopyValid = false; // Comment this line if you still want the callback to be called
+
+    Serial.println();
+
+    Serial.print(F("Time: ")); // Print the time
+    uint8_t hms = myGNSS.packetUBXNAVPVT->callbackData->hour; // Print the hours
+    if (hms < 10) Serial.print(F("0")); // Print a leading zero if required
+    Serial.print(hms);
+    Serial.print(F(":"));
+    hms = myGNSS.packetUBXNAVPVT->callbackData->min; // Print the minutes
+    if (hms < 10) Serial.print(F("0")); // Print a leading zero if required
+    Serial.print(hms);
+    Serial.print(F(":"));
+    hms = myGNSS.packetUBXNAVPVT->callbackData->sec; // Print the seconds
+    if (hms < 10) Serial.print(F("0")); // Print a leading zero if required
+    Serial.print(hms);
+    Serial.print(F("."));
+    unsigned long millisecs = myGNSS.packetUBXNAVPVT->callbackData->iTOW % 1000; // Print the milliseconds
+    if (millisecs < 100) Serial.print(F("0")); // Print the trailing zeros correctly
+    if (millisecs < 10) Serial.print(F("0"));
+    Serial.print(millisecs);
+
+    long latitude = myGNSS.packetUBXNAVPVT->callbackData->lat; // Print the latitude
+    Serial.print(F(" Lat: "));
+    Serial.print(latitude);
+
+    long longitude = myGNSS.packetUBXNAVPVT->callbackData->lon; // Print the longitude
+    Serial.print(F(" Long: "));
+    Serial.print(longitude);
+    Serial.print(F(" (degrees * 10^-7)"));
+
+    long altitude = myGNSS.packetUBXNAVPVT->callbackData->hMSL; // Print the height above mean sea level
+    Serial.print(F(" Height above MSL: "));
+    Serial.print(altitude);
+    Serial.println(F(" (mm)"));
+  }
+
+  myGNSS.checkCallbacks(); // Check if any callbacks are waiting to be processed. There will not be any in this example, unless you commented the line above
+
+  Serial.print(".");
+  delay(50);
+}

library.properties

@@ -1,5 +1,5 @@
 name=SparkFun u-blox GNSS Arduino Library
-version=2.2.9
+version=2.2.10
 author=SparkFun Electronics <techsupport@sparkfun.com>
 maintainer=SparkFun Electronics <sparkfun.com>
 sentence=Library for I2C, Serial and SPI Communication with u-blox GNSS modules<br/><br/>

src/SparkFun_u-blox_GNSS_Arduino_Library.cpp

@@ -3959,8 +3959,7 @@ void SFE_UBLOX_GNSS::processUBXpacket(ubxPacket *msg)
         packetUBXCFGPRT->dataValid = true;
       }
     }
-    break;
+    else if (msg->id == UBX_CFG_RATE && msg->len == UBX_CFG_RATE_LEN)
-    if (msg->id == UBX_CFG_RATE && msg->len == UBX_CFG_RATE_LEN)
     {
       // Parse various byte fields into storage - but only if we have memory allocated for it
       if (packetUBXCFGRATE != NULL)
@@ -12994,7 +12993,7 @@ bool SFE_UBLOX_GNSS::getPortSettingsInternal(uint8_t portID, uint16_t maxWait)
   if (result == SFE_UBLOX_STATUS_DATA_OVERWRITTEN)
     retVal = true;
 
-  // Now disable automatic support for CFG-RATE (see above)
+  // Now disable automatic support for CFG-PRT (see above)
   delete packetUBXCFGPRT;
   packetUBXCFGPRT = NULL;