PlatformIO-Libs/SparkFunGNSS
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge pull request #161 from sparkfun/release_candidate

Browse Source 
v2.2.17
This commit is contained in:
Paul
2022-10-17 09:57:21 +01:00
committed by GitHub
parent 6f98c6c27a 634152faca
commit 3a1d357ff1
9 changed files with 458 additions and 9 deletions
Download Patch File Download Diff File Expand all files Collapse all files
examples/Example32_NEO-D9C/Example32_NEO-D9C.ino
+136
View File
@@ -0,0 +1,136 @@
/*
NEO-D9C QZSS-L6 receiver example
By: SparkFun Electronics / Paul Clark
Date: September 23rd, 2022
License: MIT. See license file for more information but you can
basically do whatever you want with this code.
This example shows how to display a summary of the NEO-D9C's UBX-RXM-QZSSL6 data.
It also enables UBX-RXM-QZSSL6 message output on both UART1 and UART2 at 38400 baud
so you can feed the corrections directly to (e.g.) a ZED-F9P.
We believe the NEO-D9C's I2C address should be 0x43 (like the NEO-D9S). But, reported by users in Japan,
the initial NEO-D9C's use address 0x42 - which is the same as the ZED-F9P.
If you have one of the initial NEO-D9C's, the address 0x42 should work for you.
If you have a newer or upgraded NEO-D9C, then you may need to change to 0x43. See line 100.
Also, again reported by users in Japan, the initial NEO-D9C's do not support UBX-CFG-PRT.
The library uses UBX-CFG-PRT inside .begin (.isConnected) to check if the module is connected.
This then fails with the initial NEO-D9C's.
The work-around is to set the .begin assumeSuccess parameter to true.
With newer NEO-D9C's this work-around may not be necessary. Again see line 100.
Feel like supporting open source hardware?
Buy a board from SparkFun!
ZED-F9P RTK2: https://www.sparkfun.com/products/16481
NEO-D9S L-Band Correction Data Receiver: https://www.sparkfun.com/products/19390
Hardware Connections:
Use a Qwiic cable to connect the NEO-D9C QZSS-L6 corection data receiver to your board
If you don't have a platform with a Qwiic connection use the SparkFun Qwiic Breadboard Jumper (https://www.sparkfun.com/products/14425)
Open the serial monitor at 115200 baud to see the output
*/
#include <SparkFun_u-blox_GNSS_Arduino_Library.h> //Click here to get the library: http://librarymanager/All#SparkFun_u-blox_GNSS
SFE_UBLOX_GNSS myQZSS; // NEO-D9C
#define OK(ok) (ok ? F(" -> OK") : F(" -> ERROR!")) // Convert uint8_t into OK/ERROR
//=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
// Callback: printRXMQZSSL6 will be called when new QZSS-L6 data arrives
// See u-blox_structs.h for the full definition of UBX_RXM_QZSSL6_message_data_t
// _____ You can use any name you like for the callback. Use the same name when you call setRXMQZSSL6messageCallbackPtr
// / _____ This _must_ be UBX_RXM_QZSSL6_message_data_t
// | / _____ You can use any name you like for the struct
// | | /
// | | |
void printRXMQZSSL6(UBX_RXM_QZSSL6_message_data_t *qzssL6Data)
{
Serial.println(F("New QZSS-L6 data received:"));
Serial.print(F("Message version: "));
Serial.println(qzssL6Data->payload[0]);
Serial.print(F("Satellite Identifier: "));
Serial.println(qzssL6Data->payload[1]);
Serial.print(F("Carrier / Noise: "));
double cno = (0.00390625 * ((double)qzssL6Data->payload[2])) + ((double)qzssL6Data->payload[3]);
Serial.println(cno, 1);
Serial.print(F("Bit Errors Corrected: "));
Serial.println(qzssL6Data->payload[9]);
uint16_t chInfo = (((uint16_t)qzssL6Data->payload[11]) << 8) | qzssL6Data->payload[10];
uint16_t errStatus = ((chInfo >> 12) & 0x3);
Serial.print(F("Receiver Channel: "));
Serial.println((chInfo >> 8) & 0x3);
Serial.print(F("Message Name: L6"));
Serial.println(((chInfo >> 10) & 0x1) == 0 ? F("D") : F("E"));
Serial.print(F("Error Status: "));
if (errStatus == 1)
Serial.println("error-free");
else if (errStatus == 2)
Serial.println("erroneous");
else
Serial.println("unknown");
Serial.print(F("Channel Name: "));
Serial.println(((chInfo >> 14) & 0x3) == 0 ? F("A") : F("B"));
Serial.println();
}
//=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
void setup()
{
Serial.begin(115200);
Serial.println(F("NEO-D9C Example"));
Wire.begin(); //Start I2C
//=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
// Begin and configure the NEO-D9C QZSS-L6 receiver
//myQZSS.enableDebugging(); // Uncomment this line to enable helpful debug messages on Serial
// For the initial NEO-D9C's: connect using address 0x42; set the assumeSuccess parameter to true
while (myQZSS.begin(Wire, 0x42, 1100, true) == false)
// For newer NEO-D9C's: use address 0x43; leave assumeSuccess set to false (default)
//while (myQZSS.begin(Wire, 0x43) == false)
{
Serial.println(F("u-blox NEO-D9C not detected at selected I2C address. Please check wiring and I2C address."));
delay(2000);
}
Serial.println(F("u-blox NEO-D9C connected"));
uint8_t ok = myQZSS.setVal(UBLOX_CFG_MSGOUT_UBX_RXM_QZSSL6_I2C, 1); // Output QZSS-L6 message on the I2C port
Serial.print(F("QZSS-L6: I2C configuration "));
Serial.println(OK(ok));
if (ok) ok = myQZSS.setVal(UBLOX_CFG_MSGOUT_UBX_RXM_QZSSL6_UART1, 1); // Output QZSS-L6 message on UART1
if (ok) ok = myQZSS.setVal32(UBLOX_CFG_UART1_BAUDRATE, 38400); // Match UART1 baudrate with ZED
Serial.print(F("QZSS-L6: UART1 configuration "));
Serial.println(OK(ok));
if (ok) ok = myQZSS.setVal(UBLOX_CFG_UART2OUTPROT_UBX, 1); // Enable UBX output on UART2
if (ok) ok = myQZSS.setVal(UBLOX_CFG_MSGOUT_UBX_RXM_QZSSL6_UART2, 1); // Output QZSS-L6 message on UART2
if (ok) ok = myQZSS.setVal32(UBLOX_CFG_UART2_BAUDRATE, 38400); // Match UART2 baudrate with ZED
Serial.print(F("QZSS-L6: UART2 configuration "));
Serial.println(OK(ok));
myQZSS.setRXMQZSSL6messageCallbackPtr(&printRXMQZSSL6); // Call printRXMQZSSL6 when new QZSS-L6 data arrives
}
//=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
void loop()
{
myQZSS.checkUblox(); // Check for the arrival of new QZSS-L6 data and process it.
myQZSS.checkCallbacks(); // Check if any QZSS-L6 callbacks are waiting to be processed.
}
examples/NEO-M8P-2/Example1_EnableRTCM/Example1_EnableRTCM.ino
+1 -1
View File
@@ -46,7 +46,7 @@ void setup()
Serial.println(F("Press any key to send commands to enable RTCM 3.x")); Serial.println(F("Press any key to send commands to enable RTCM 3.x"));
while(Serial.available() == 0) ; //Wait for user to press a key while(Serial.available() == 0) ; //Wait for user to press a key
myGNSS.setI2COutput(COM_TYPE_UBX); //Set the I2C port to output UBX only (turn off NMEA noise) myGNSS.setI2COutput(COM_TYPE_UBX | COM_TYPE_NMEA | COM_TYPE_RTCM3); // Ensure RTCM3 is enabled
myGNSS.saveConfiguration(); //Save the current settings to flash and BBR myGNSS.saveConfiguration(); //Save the current settings to flash and BBR
bool response = true; bool response = true;
examples/NEO-M8P-2/Example2_StartRTCMBase/Example2_StartRTCMBase.ino
+1 -1
View File
@@ -46,7 +46,7 @@ void setup()
while (1); while (1);
} }
myGNSS.setI2COutput(COM_TYPE_UBX); //Set the I2C port to output UBX only (turn off NMEA noise) myGNSS.setI2COutput(COM_TYPE_UBX | COM_TYPE_NMEA | COM_TYPE_RTCM3); // Ensure RTCM3 is enabled
myGNSS.saveConfiguration(); //Save the current settings to flash and BBR myGNSS.saveConfiguration(); //Save the current settings to flash and BBR
while (Serial.available()) Serial.read(); //Clear any latent chars in serial buffer while (Serial.available()) Serial.read(); //Clear any latent chars in serial buffer
examples/NEO-M8P-2/Example3_BaseWithLCD/Example3_BaseWithLCD.ino
+3
View File
@@ -67,6 +67,9 @@ void setup()
lcd.setCursor(0, 1); lcd.setCursor(0, 1);
lcd.print("GNSS Detected"); lcd.print("GNSS Detected");
myGNSS.setI2COutput(COM_TYPE_UBX | COM_TYPE_NMEA | COM_TYPE_RTCM3); // Ensure RTCM3 is enabled
myGNSS.saveConfiguration(); //Save the current settings to flash and BBR
//Check if Survey is in Progress before initiating one //Check if Survey is in Progress before initiating one
// From v2.0, the data from getSurveyStatus (UBX-NAV-SVIN) is returned in UBX_NAV_SVIN_t packetUBXNAVSVIN // From v2.0, the data from getSurveyStatus (UBX-NAV-SVIN) is returned in UBX_NAV_SVIN_t packetUBXNAVSVIN
// Please see u-blox_structs.h for the full definition of UBX_NAV_SVIN_t // Please see u-blox_structs.h for the full definition of UBX_NAV_SVIN_t
examples/ZED-F9P/Example16_NTRIPClient_WithGGA/Example16_NTRIPClient_WithGGA.ino
+1 -2
View File
@@ -78,9 +78,8 @@ void setup()
while (myGNSS.begin() == false) //Connect to the Ublox module using Wire port while (myGNSS.begin() == false) //Connect to the Ublox module using Wire port
{ {
Serial.println(F("u-blox GPS not detected at default I2C address. Please check wiring. Freezing.")); Serial.println(F("u-blox GPS not detected at default I2C address. Please check wiring."));
delay(2000); delay(2000);
//while (1);
} }
Serial.println(F("u-blox module connected")); Serial.println(F("u-blox module connected"));
examples/ZED-F9P/Example22_QZSSL6_Corrections_with_NEO-D9C/Example22_QZSSL6_Corrections_with_NEO-D9C.ino
+312
View File
@@ -0,0 +1,312 @@
/*
Use the NEO-D9C QZSS-L6 receiver to provide corrections to a ZED-F9x via UART
By: SparkFun Electronics / Paul Clark
Based on original code by: u-blox AG / Michael Ammann
Date: September 23rd, 2022
License: MIT. See license file for more information but you can
basically do whatever you want with this code.
This example shows how to configure a NEO-D9C QZSS-L6 receiver and have it send coorection data to a ZED-F9x via Serial (UART).
We believe the NEO-D9C's I2C address should be 0x43 (like the NEO-D9S). But, reported by users in Japan,
the initial NEO-D9C's use address 0x42 - which is the same as the ZED-F9P....
As a work-around, this example expects the ZED-F9P to be connected via UART1 Serial (Teensy Serial1) to avoid a collision
on the I2C bus.
(Yes, OK, it is straight-forward to change the NEO-D9C's I2C address. But, with this example, you do not need to do that.)
Also, again reported by users in Japan, the initial NEO-D9C's do not support UBX-CFG-PRT.
The library uses UBX-CFG-PRT inside .begin (.isConnected) to check if the module is connected.
This then fails with the initial NEO-D9C's.
The work-around is to set the .begin assumeSuccess parameter to true.
With newer NEO-D9C's this work-around may not be necessary. See line 272.
Connections: e.g. for Teensy 4.0, Geosense D9CX1 NEO-D9C and SparkFun ZED-F9P:
Teensy 5V (Vin) -> ZED-F9P 5V -> D9CX1 V5V (JP1 Pin 2)
Teensy GND -> ZED-F9P GND -> D9CX1 GND (JP1 Pin 1)
Teensy SDA1 (17) -> D9CX1 SDA (JP1 Pin 5)
Teensy SCL1 (16) -> D9CX1 SCL (JP1 Pin 6)
Teensy Serial1 TX1 (1) -> ZED-F9P UART1 RX1
Teensy Serial1 RX1 (0) -> ZED-F9P UART1 TX1
D9CX1 UART1 TX1 (JP1 Pin 3) -> ZED-F9P UART2 RX2
D9CX1 UART1 RX1 (JP1 Pin 4) -> ZED-F9P UART2 TX2
The Teensy communicates with the NEO-D9C (D9CX1) via I2C on address 0x42
The Teensy communicates with the ZED-F9P via UART (Serial1 on Teensy, UART1 on ZED) to avoid the I2C address collision
The NEO-D9C corrections (UBX-RXM-QZSSL6) are sent from NEO UART1 to ZED UART2
Feel like supporting open source hardware?
Buy a board from SparkFun!
ZED-F9P RTK2: https://www.sparkfun.com/products/16481
NEO-D9S L-Band Correction Data Receiver: https://www.sparkfun.com/products/19390
Hardware Connections:
Use Qwiic cables to connect the NEO-D9S and ZED-F9x GNSS to your board
If you don't have a platform with a Qwiic connection use the SparkFun Qwiic Breadboard Jumper (https://www.sparkfun.com/products/14425)
Open the serial monitor at 115200 baud to see the output
*/
#include <SparkFun_u-blox_GNSS_Arduino_Library.h> //http://librarymanager/All#SparkFun_u-blox_GNSS
SFE_UBLOX_GNSS myGNSS; // ZED-F9x
SFE_UBLOX_GNSS myQZSS; // NEO-D9C
#define OK(ok) (ok ? F(" -> OK") : F(" -> ERROR!")) // Convert uint8_t into OK/ERROR
//=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
// Callback: printRXMQZSSL6 will be called when new QZSS-L6 data arrives
// See u-blox_structs.h for the full definition of UBX_RXM_QZSSL6_message_data_t
// _____ You can use any name you like for the callback. Use the same name when you call setRXMQZSSL6messageCallbackPtr
// / _____ This _must_ be UBX_RXM_QZSSL6_message_data_t
// | / _____ You can use any name you like for the struct
// | | /
// | | |
void printRXMQZSSL6(UBX_RXM_QZSSL6_message_data_t *qzssL6Data)
{
Serial.println(F("New QZSS-L6 data received:"));
Serial.print(F("Message version: "));
Serial.println(qzssL6Data->payload[0]);
Serial.print(F("Satellite Identifier: "));
Serial.println(qzssL6Data->payload[1]);
Serial.print(F("Carrier / Noise: "));
double cno = (0.00390625 * ((double)qzssL6Data->payload[2])) + ((double)qzssL6Data->payload[3]);
Serial.println(cno, 1);
Serial.print(F("Bit Errors Corrected: "));
Serial.println(qzssL6Data->payload[9]);
uint16_t chInfo = (((uint16_t)qzssL6Data->payload[11]) << 8) | qzssL6Data->payload[10];
uint16_t errStatus = ((chInfo >> 12) & 0x3);
Serial.print(F("Receiver Channel: "));
Serial.println((chInfo >> 8) & 0x3);
Serial.print(F("Message Name: L6"));
Serial.println(((chInfo >> 10) & 0x1) == 0 ? F("D") : F("E"));
Serial.print(F("Error Status: "));
if (errStatus == 1)
Serial.println("error-free");
else if (errStatus == 2)
Serial.println("erroneous");
else
Serial.println("unknown");
Serial.print(F("Channel Name: "));
Serial.println(((chInfo >> 14) & 0x3) == 0 ? F("A") : F("B"));
Serial.println();
}
//=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
// Callback: printPVTdata will be called when new NAV PVT data arrives
// See u-blox_structs.h for the full definition of UBX_NAV_PVT_data_t
// _____ You can use any name you like for the callback. Use the same name when you call setAutoPVTcallbackPtr
// / _____ This _must_ be UBX_NAV_PVT_data_t
// | / _____ You can use any name you like for the struct
// | | /
// | | |
void printPVTdata(UBX_NAV_PVT_data_t *ubxDataStruct)
{
double latitude = ubxDataStruct->lat; // Print the latitude
Serial.print(F("Lat: "));
Serial.print(latitude / 10000000.0, 7);
double longitude = ubxDataStruct->lon; // Print the longitude
Serial.print(F(" Long: "));
Serial.print(longitude / 10000000.0, 7);
double altitude = ubxDataStruct->hMSL; // Print the height above mean sea level
Serial.print(F(" Height: "));
Serial.print(altitude / 1000.0, 3);
uint8_t fixType = ubxDataStruct->fixType; // Print the fix type
Serial.print(F(" Fix: "));
Serial.print(fixType);
if (fixType == 0)
Serial.print(F(" (None)"));
else if (fixType == 1)
Serial.print(F(" (Dead Reckoning)"));
else if (fixType == 2)
Serial.print(F(" (2D)"));
else if (fixType == 3)
Serial.print(F(" (3D)"));
else if (fixType == 3)
Serial.print(F(" (GNSS + Dead Reckoning)"));
else if (fixType == 5)
Serial.print(F(" (Time Only)"));
else
Serial.print(F(" (UNKNOWN)"));
uint8_t carrSoln = ubxDataStruct->flags.bits.carrSoln; // Print the carrier solution
Serial.print(F(" Carrier Solution: "));
Serial.print(carrSoln);
if (carrSoln == 0)
Serial.print(F(" (None)"));
else if (carrSoln == 1)
Serial.print(F(" (Floating)"));
else if (carrSoln == 2)
Serial.print(F(" (Fixed)"));
else
Serial.print(F(" (UNKNOWN)"));
uint32_t hAcc = ubxDataStruct->hAcc; // Print the horizontal accuracy estimate
Serial.print(F(" Horizontal Accuracy Estimate: "));
Serial.print(hAcc);
Serial.print(F(" (mm)"));
Serial.println();
}
//=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
// Callback: printRXMCOR will be called when new RXM COR data arrives
// See u-blox_structs.h for the full definition of UBX_RXM_COR_data_t
// _____ You can use any name you like for the callback. Use the same name when you call setRXMCORcallbackPtr
// / _____ This _must_ be UBX_RXM_COR_data_t
// | / _____ You can use any name you like for the struct
// | | /
// | | |
void printRXMCOR(UBX_RXM_COR_data_t *ubxDataStruct)
{
Serial.print(F("UBX-RXM-COR: ebno: "));
Serial.print(ubxDataStruct->ebno);
Serial.print(F(" protocol: "));
if (ubxDataStruct->statusInfo.bits.protocol == 1)
Serial.print(F("RTCM3"));
else if (ubxDataStruct->statusInfo.bits.protocol == 2)
Serial.print(F("SPARTN"));
else if (ubxDataStruct->statusInfo.bits.protocol == 29)
Serial.print(F("PMP (SPARTN)"));
else if (ubxDataStruct->statusInfo.bits.protocol == 30)
Serial.print(F("QZSSL6"));
else
Serial.print(F("Unknown"));
Serial.print(F(" errStatus: "));
if (ubxDataStruct->statusInfo.bits.errStatus == 1)
Serial.print(F("Error-free"));
else if (ubxDataStruct->statusInfo.bits.errStatus == 2)
Serial.print(F("Erroneous"));
else
Serial.print(F("Unknown"));
Serial.print(F(" msgUsed: "));
if (ubxDataStruct->statusInfo.bits.msgUsed == 1)
Serial.print(F("Not used"));
else if (ubxDataStruct->statusInfo.bits.msgUsed == 2)
Serial.print(F("Used"));
else
Serial.print(F("Unknown"));
Serial.print(F(" msgEncrypted: "));
if (ubxDataStruct->statusInfo.bits.msgEncrypted == 1)
Serial.print(F("Not encrypted"));
else if (ubxDataStruct->statusInfo.bits.msgEncrypted == 2)
Serial.print(F("Encrypted"));
else
Serial.print(F("Unknown"));
Serial.print(F(" msgDecrypted: "));
if (ubxDataStruct->statusInfo.bits.msgDecrypted == 1)
Serial.print(F("Not decrypted"));
else if (ubxDataStruct->statusInfo.bits.msgDecrypted == 2)
Serial.print(F("Successfully decrypted"));
else
Serial.print(F("Unknown"));
Serial.println();
}
//=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
void setup()
{
Serial.begin(115200);
Serial.println(F("NEO-D9C Corrections"));
//=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
// Begin and configure the ZED-F9x
Serial1.begin(38400); // The ZED-F9P is connected via Serial1 to UART1
//myGNSS.enableDebugging(); // Uncomment this line to enable helpful debug messages on Serial
while (myGNSS.begin(Serial1) == false) //Connect to the u-blox module using Serial1 and UART1
{
Serial.println(F("u-blox GNSS module not detected. Please check wiring."));
delay(2000);
}
Serial.println(F("u-blox GNSS module connected"));
uint8_t ok = myGNSS.setUART1Output(COM_TYPE_UBX); //Turn off NMEA noise
if (ok) ok = myGNSS.setPortInput(COM_PORT_UART2, COM_TYPE_UBX | COM_TYPE_RTCM3 | COM_TYPE_SPARTN); //Be sure SPARTN input is enabled on UART2
if (ok) ok = myGNSS.setDGNSSConfiguration(SFE_UBLOX_DGNSS_MODE_FIXED); // Set the differential mode - ambiguities are fixed whenever possible
if (ok) ok = myGNSS.setNavigationFrequency(1); //Set output in Hz.
if (ok) ok = myGNSS.setVal8(UBLOX_CFG_MSGOUT_UBX_RXM_COR_UART1, 1); // Enable UBX-RXM-COR messages on UART1
//if (ok) ok = myGNSS.saveConfiguration(VAL_CFG_SUBSEC_IOPORT | VAL_CFG_SUBSEC_MSGCONF); //Optional: Save the ioPort and message settings to NVM
Serial.print(F("GNSS: configuration "));
Serial.println(OK(ok));
myGNSS.setAutoPVTcallbackPtr(&printPVTdata); // Enable automatic NAV PVT messages with callback to printPVTdata so we can watch the carrier solution go to fixed
myGNSS.setRXMCORcallbackPtr(&printRXMCOR); // Print the contents of UBX-RXM-COR messages so we can check if the QZSS-L6 data is being decrypted successfully
//=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
// Begin and configure the NEO-D9C QZSS-L6 receiver
Wire.begin(); //Start I2C
//myQZSS.enableDebugging(); // Uncomment this line to enable helpful debug messages on Serial
// For the initial NEO-D9C's: connect using address 0x42; set the assumeSuccess parameter to true
while (myQZSS.begin(Wire, 0x42, 1100, true) == false)
// For newer NEO-D9C's: use address 0x43; leave assumeSuccess set to false (default)
//while (myQZSS.begin(Wire, 0x43) == false)
{
Serial.println(F("u-blox NEO-D9C not detected at selected I2C address. Please check wiring and I2C address."));
delay(2000);
}
Serial.println(F("u-blox NEO-D9C connected"));
ok = myQZSS.setVal(UBLOX_CFG_MSGOUT_UBX_RXM_QZSSL6_I2C, 1); // Output QZSS-L6 message on the I2C port
Serial.print(F("QZSS-L6: I2C configuration "));
Serial.println(OK(ok));
if (ok) ok = myQZSS.setVal(UBLOX_CFG_UART1OUTPROT_UBX, 1); // Enable UBX output on UART1
if (ok) ok = myQZSS.setVal(UBLOX_CFG_MSGOUT_UBX_RXM_QZSSL6_UART1, 1); // Output QZSS-L6 message on UART1
if (ok) ok = myQZSS.setVal32(UBLOX_CFG_UART1_BAUDRATE, 38400); // Match UART1 baudrate with ZED
Serial.print(F("QZSS-L6: UART1 configuration "));
Serial.println(OK(ok));
if (ok) ok = myQZSS.setVal(UBLOX_CFG_UART2OUTPROT_UBX, 1); // Enable UBX output on UART2
if (ok) ok = myQZSS.setVal(UBLOX_CFG_MSGOUT_UBX_RXM_QZSSL6_UART2, 1); // Output QZSS-L6 message on UART2
if (ok) ok = myQZSS.setVal32(UBLOX_CFG_UART2_BAUDRATE, 38400); // Match UART2 baudrate with ZED
Serial.print(F("QZSS-L6: UART2 configuration "));
Serial.println(OK(ok));
myQZSS.setRXMQZSSL6messageCallbackPtr(&printRXMQZSSL6); // Call printRXMQZSSL6 when new QZSS-L6 data arrives
}
//=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
void loop()
{
myGNSS.checkUblox(); // Check for the arrival of new GNSS data and process it.
myGNSS.checkCallbacks(); // Check if any GNSS callbacks are waiting to be processed.
myQZSS.checkUblox(); // Check for the arrival of new QZSS-L6 data and process it.
myQZSS.checkCallbacks(); // Check if any LBand callbacks are waiting to be processed.
}
examples/ZED-F9P/Example3_StartRTCMBase/Example3_StartRTCMBase.ino
+1 -1
View File
@@ -54,7 +54,7 @@ void setup()
// Uncomment the next line if you want to reset your module back to the default settings with 1Hz navigation rate // Uncomment the next line if you want to reset your module back to the default settings with 1Hz navigation rate
//myGNSS.factoryDefault(); delay(5000); //myGNSS.factoryDefault(); delay(5000);
myGNSS.setI2COutput(COM_TYPE_UBX); //Set the I2C port to output UBX only (turn off NMEA noise) myGNSS.setI2COutput(COM_TYPE_UBX | COM_TYPE_NMEA | COM_TYPE_RTCM3); // Ensure RTCM3 is enabled
myGNSS.saveConfigSelective(VAL_CFG_SUBSEC_IOPORT); //Save the communications port settings to flash and BBR myGNSS.saveConfigSelective(VAL_CFG_SUBSEC_IOPORT); //Save the communications port settings to flash and BBR
while (Serial.available()) Serial.read(); //Clear any latent chars in serial buffer while (Serial.available()) Serial.read(); //Clear any latent chars in serial buffer
examples/ZED-F9P/Example4_BaseWithLCD/Example4_BaseWithLCD.ino
+1 -2
View File
@@ -69,8 +69,7 @@ void setup()
lcd.setCursor(0, 1); lcd.setCursor(0, 1);
lcd.print("GNSS Detected"); lcd.print("GNSS Detected");
//myGNSS.setI2COutput(COM_TYPE_RTCM3); //Set the I2C port to output RTCM3 sentences (turn off NMEA noise) myGNSS.setI2COutput(COM_TYPE_UBX | COM_TYPE_NMEA | COM_TYPE_RTCM3); // Ensure RTCM3 is enabled
myGNSS.setI2COutput(COM_TYPE_UBX); //Set the I2C port to output UBX sentences (turn off NMEA noise)
myGNSS.saveConfigSelective(VAL_CFG_SUBSEC_IOPORT); //Save the communications port settings to flash and BBR myGNSS.saveConfigSelective(VAL_CFG_SUBSEC_IOPORT); //Save the communications port settings to flash and BBR
bool response = true; bool response = true;
library.properties
+1 -1
View File
@@ -1,5 +1,5 @@
name=SparkFun u-blox GNSS Arduino Library name=SparkFun u-blox GNSS Arduino Library
version=2.2.16 version=2.2.17
author=SparkFun Electronics <techsupport@sparkfun.com> author=SparkFun Electronics <techsupport@sparkfun.com>
maintainer=SparkFun Electronics <sparkfun.com> maintainer=SparkFun Electronics <sparkfun.com>
sentence=Library for I2C, Serial and SPI Communication with u-blox GNSS modules<br/><br/> sentence=Library for I2C, Serial and SPI Communication with u-blox GNSS modules<br/><br/>